021 8611 259
SALES  load cell yahoo messenger
SALES  load cell yahoo messenger
Home   »   Produk   »   Strain Amplifier
  • weigh bridge load cell
  • Banner RLC1 kecil
  • Banner s-beam load cell
  • Banner RLC2 kecil
  • Commpresion Load Cell
  • Banner RLC3 kecil
  • Load Cell application
  • Banner RLC4 kecil
  • Torque sensor
  • Banner 4
  • Banner RLC1
  • Banner RLC2
  • Banner RLC3
  • Banner RLC4
  • Banner Force Gauge
  • Banner Cap Torque Tester
  • Banner Torque Tester

Dynamic Strain Amplifier CSA-561

 
 
 

Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.

 

Anda juga bisa memesan via telephone. Silakan hubungi sales consultant, Hotline kami di, 021 8611 259 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@rajaloadcell.com

FEATURES

  • Input and output isolation
  • Digital switch for strain setting
  • Digital monitor of 4 1/2 digits

 

 

SPECIFICATIONS

Bridge power supply AC2.0 V rms sine wave 5 kHz±0.1 kHz
Input range 0.5 mV/V ~ 3 mV/V (1 mV/V=2 000x10-6strain)
Output ±10 V output
(±0.5 mV/V input, at bridge power supply AC2.0 V rms)
Output Load Resistance Resistance load 2 kΩ or more
Output capacity load 0.1 uF or less
Zero adjustment range ±2.5 mV/V
Coarse adjustment Automatic balance
Fine adjustment Zero adjustment trimmer
Resistance section pprox.1 %(±2.5 mV/V)
Capacitance section Up to 2 000 pF is possible
Automatic balancing time Approx.1 s,
Accuracy ±0.2 %F.S.,
Back-up time : 24 h or more
Non-linearity 0.05 %F.S.
Temperature efficient Zero point ±0.1 μV/℃ (Input conversion)
Sensitivity within ±0.05 %F.S./℃
Frequency response range DC ~ 2 kHz(Filter : W/B)
(Changeable to 1 Hz, 10 Hz, 100 Hz, 300 Hz, 1 kHz or W/B)
10 Hz ~ W/B:+1 dB -3 dB±1 dB,
1 Hz:+1 dB -3 dB±3 dB
Display section Output voltage display
0 ~ ±10.000 Digital display (Green LED)
Sampling rate Approx. 4 times/s
ERROR function (+10 V or more or -10 V or less), the display flashes 0.000 or -0.000 on and off and also ERROR will be shown. (Photocoupler output)
Remote function Automatic balance ±CALIB
LOCK function Automatic balance
Prohibit the operation of ± CALIB
(Including ±CALIB of automatic balance for remote function)
Operating temp./humidity range Temperature -10 ℃ ~ 50 ℃
Humidity 85 %RH or less (Non condensing)
Power supply Power supply voltage AC100 V±10 V 50/60 Hz
Power consumption Approx. 10 VA (at AC100 V)
Outline dimensions
(W x H x D)
42 mm x 176 mm x 284.4 mm (Excludes protruding parts.)
Weight Approx. 1.5 kg