021 8690 6777, 0812 1470 6170
0816 1740 8926 , 0816 1740 8891, 0878 7800 3233 , 0821 1170 1076
sales@rajaloadcell.com
Home   »   Produk   »   Pressure Sensor
  • weigh bridge load cell
  • Banner RLC1 kecil
  • Single Point Load Cell
  • Banner s-beam load cell
  • Banner RLC2 kecil
  • Single Point Load Cell
  • Commpresion Load Cell
  • Banner RLC3 kecil
  • Single Point Load Cell
  • Load Cell application
  • Banner RLC4 kecil
  • Torque sensor
  • Banner RLC1
  • Banner RLC2
  • Banner RLC3
  • Banner RLC4
  • Banner Force Gauge
  • Banner Cap Torque Tester
  • Banner Torque Tester
  • Torque Measuring Flange
  • Weighing Indicator
  • Seat Belt Load Cell
  • Indikator Timbangan
  • Digital Indikator

NS100A series

 
 
 

Untuk memesan, silahkan tekan tombol ORDER. Anda bisa memesan barang secara Online.

 

Anda juga bisa memesan via telephone. Silakan hubungi sales consultant, Hotline kami di, 0878 7800 3233 , 0821 1170 1076 sales Consultant kami akan menjelaskan detail produk dan harga terbaru. atau email ke alamat sales@rajaloadcell.com

FEATURES

  Highly accurate pressure transmitter 0.2%R.O. as a standard by SOS technology. (including Non-linearity, Hysteresis and Repeatability.)
0.1 %R.O. is also available as a high accurate type.
  High reliability and durability by SOS technology.
  Can correspond to the absolute pressure and compound pressure
  Small size and light weight

  Wide range pressure from 200kPa to 50MPa can be measure.

 

 

SPECIFICATIONS

Rated capacity 200 kPa ~ 50 MPa
Safe overload 200 %R.C.
Ultimate overload 300 %R.C.
Accuracy 0.2 %R.O. (including non-linearity, hysteresis and repeatability)
Rated output Current : 4 mA ~ 20 mA (2 wires method, Load resistance 500 ohm or less, at 24 V)
Voltage : 0 V ~ 10 V (Load resistance 5 k-ohm or more)
Response frequency 1 kHz
Power supply voltage DC 24 V(18 V ~ 28 V)
Power consumption Approx. 20 mA
Insulation resistance 1 000 MΩ or more (DC 50 V)
Temp. range, compensated -20 ℃ ~ 70 ℃
Temp. range, safe -30 ℃ ~ 80 ℃
Temp. effect on zero 0.2 %R.O./10 ℃
Temp. effect on output 0.2 %LOAD/10 ℃
Cable φ4.7, 2 m shielded cable directly attached,
Cable end separated (Cable attached type)
Connector R03-RB5F(receptacle)
Class of protection IP44 or equivalent
Material of pressure hole Stainless steel
Material of cover Alluminium alloy (with almite processing)
Material of pressure diaphragm Single crystal sapphire, etc.,
Mounting screw G3/8{PF}
Weight Approx. 200 g
Tightening torque 20 N・m ~ 40 N・m {2.04 kgf・m ~ 4.08 kgf・m}
Special specification

NS100A-D6 : Guranteed accuracy 0.2 %R.O. at negative side. Power supply voltage : ±DC15 V
NS100A-H : As an amplifier part is are separated.(The highest, environmental temperature is 200 ℃)

NS100A-S70 : IP67 waterproof construction with zero adjustment factor)
NS102 : Pressure inlet port : φ10